Adtran T1 ESF CSU T1/Fractional T1 T1/Fractional T1 CSU - RJ-48C - 1.54Mbps

$638.99

Product Info

General Information
Manufacturer	Adtran
Manufacturer Part Number	1202066L1
Manufacturer Website Address	www.adtran.com
Product Name	T1 ESF CSU T1/Fractional T1
Marketing Information	The ADTRAN T1 ESF CSU is a full-featured T1 Channel Service Unit used to connect T1 data terminal equipment (DTE) such as a PBX, switch or channel bank to T1 facilities.Capable of interfacing to both B8ZS or AMI circuits, the T1 ESF CSU can convert signal formats or line code to integrate older equipment. The ESF CSU is designed to provide alarms, loopbacks, signal regeneration, line build-out, and surge protection, while maintaining 1s density for the DTE and T1 network.
Product Type	T1/Fractional T1 CSU

Technical Information
Data Encoding	AMI/B8ZS

Interfaces/Ports
Ports	8-pin RJ-48C Physical

Media & Performance
Data Transfer Rate	1.54Mbps

Management & Protocols
Management	SNMP

Controls/Indicators
Status Indicators	Status Net. & Eq. LOS Net. & Eq. AIS Net. & Eq. OOF Net. & Eq. Yellow Alarm Test Net. & Eq. Code Violation

Environmental Conditions
Temperature	0 °C (32 °F) to 50 °C (122 °F) Operating -20 °C (-4 °F) to 70 °C (158 °F) Storage
Humidity	Up to 95% Non-condensing Relative Humidity

Miscellaneous
Package Contents	Manual T1 Loopback Test Adapter RJ45 Cable
Additional Information	Network Interface: - Specifications: ANSI T1.403, AT&T TR62411 - Framing: SF/ESF - ESF Format: ANSI T1.403, AT&T 54016 - Transmission Type: - Regenerative transparent: Network & DTE User Testing: - Local: Payload/Line (NI), DTE (T1) - Remote: Payload/Line (NI) - Test Patterns: 1:8, All 0's, All 1's Performance Monitoring: - Performance Data: - BPVs/CRCs, ES, SES, UAS, %AS, %EF SEC - Alarms, Error Rates - Reports: NI information stored 24 hrs, every 15 min. - PRMS: - ANSI Performance Report - Messages (User Selectable) Equipment Interface: - Compliance: ANSI T1.403, AT&T 62411 - Receiver Performance: Automatic Line Build-out for 0-655 ft. - Keep Alive Signal: Unframed/framed "All 1's" loss of DTE signal User Options: - Mounting: Single Slot in ADTRAN Smart 16 Chassis - Bantam Jacks: - Test Signal access to Network & DTE - Non-interrupt signal receive: Network & DTE Connectivity Technology: Cable
Certifications & Standards	FCC part 15 Class A Part 68 Industry Canada CS03 UL 1459 CUL


There are currently no product reviews. Write a review on this product!

Maunufacturer's Information
Other products

Product Reviews
There are currently no product reviews
Write a review on this product!

Additional Information
This product was added to our catalog on Thursday 06 March, 2008.
Notify me of updates to Adtran T1 ESF CSU T1/Fractional T1
Tell someone you know about this product.