Adtran TSU 120e T1/Fractional T1 DSU T1/Fractional T1 CSU/DSU - 2 x EIA-232 Serial, RJ-45 DSX-1, RJ-48C , Serial V.35 , RJ-48C - CCITT V.35 - 1.54Mbps

$1,575.99

Product Info

Item #:	EH10008901
Manufacturer:	Adtran
Mfr. Part #:	1202129L1
Condition:	New
Price:	$1,575.99
Stock:	Out of Stock

General Information
Manufacturer	Adtran
Manufacturer Part Number	1202129L1
Manufacturer Website Address	www.adtran.com
Product Name	TSU 120e T1/Fractional T1 DSU
Marketing Information	The TSU 120e is modular, full-featured T1/FT1 multiplexer designed to support a wide range of end-user applications.
Product Type	T1/Fractional T1 CSU/DSU

Technical Information
Data Encoding	AMI/B8ZS
Diagnostic Features	Local: Payload, Line, and DTE Loopback Remote: - Payload, Line, and DTE Loopback - Fractional T1 Loopback: Per ANSI T1.403-1995, Annex B - CSU Loopback (from Carrier Network) Test Pattern Generator and Detector: - QRSS and 511 (selectable DS0s) - All 0s and All 1s (transmit only)

Interfaces/Ports
Ports	EIA-232 Serial 2 x 8-pin RJ-45 Connector Physical 8-pin RJ-48C Physical 34-pin Serial V.35 Mechanical 8-pin RJ-48C DSX-1 Physical
Electrical Interface	CCITT V.35

Media & Performance
Data Transfer Rate	1.54Mbps

Management & Protocols
Management	SNMP

Power Description
Input Voltage	115 V AC
Frequency	60 Hz
Power Consumption	9 W

Environmental Conditions
Temperature	0 °C (32 °F) to 45 °C (113 °F) Operating -20 °C (-4 °F) to 70 °C (158 °F) Storage

Physical Characteristics
Dimensions	3.12" Height x 8.5" Width x 12.5" Depth
Shipping Dimensions	6" Height x 12" Width x 17" Depth
Weight	4 lb
Shipping Weight	7.61 lb

Miscellaneous
Package Contents	One 6 ft. modular 8-pin to 8-pin cable Modular-tofemale DB-25 adapter Modular-to-female DB-15 adapter Two 15 ft modular T1 cables User manual
Additional Information	Network Interface: - Framing: D4(SF)/ESF, AT&T 54016 or ANSI T1.403 - DS0 Assignment: user selectable - T1 Transmit Timing: Network, Secondary NI, Normal (CSU), Internal, Base DSX-1 or Base DTE V.35 DTE Interface: - Clock Options: Normal/Inverted & Internal/External Dial BackUp: - Accessible on base V.35 DTE Port - Requires optional V.35 "Y" cable - DBU Dialing: DTR dialing - DBU Test: Loopback to DCE, Test dialup network, Force dial backup DSX-1 Interface: - Line Interface: DSX-1 per ANSI T1.102 - Physical Interface: RJ-48C, modular 8-pin - DSX-1 Framing: D4(SF)/ESF - DSX-1 Line Code: AMI/B8ZS - DSX-1 Line Length: 0 to 655 ft in 133 ft steps Testing and Troubleshooting: - Local: Payload, Line, and DTE Loopback - Remote: - Payload, Line, and DTE Loopback - Fractional T1 Loopback: Per ANSI T1.403-1995, Annex B - CSU Loopback (from Carrier Network) - Test Pattern Generator and Detector: - QRSS and 511 (selectable DS0s) - All 0s and All 1s (transmit only) - Performance Monitoring: - Error Counts: ES, SES, UAS, % AS, % EFSEC, Alarms and Error Rates - Reports: NI information stored for last 24 hours (15-minute increments) - PRMS: ANSI performance report messages - Network & DSX-1 Interface Test Jacks: - Bantam Jacks: TX, RX and RXMON Management Options and Interfaces: - Control In/Control Out Ports: - Interface: EIA-232, PC serial port, modem or SLIP connection to router - Physical Connector: RJ-45, modular 8-pin SNMP/Telnet - SLIP connection to router - MIB II, RFC1213, and 1407 compliant - ADTRAN Enterprise MIB for extended monitoring, 120e control/configuration and expansion module support - Service: SNMP, Telnet, ICMP, ARP, PING, T-Watch PRO
Certifications & Standards	UL 1950 CUL FCC Part 15 (Class A) FCC Part 68

Warranty
Standard Warranty	5 Year - North American

Reviews


There are currently no product reviews. Write a review on this product!

Manufacturer

Maunufacturer's Information
Other products

Extra Info

Product Reviews
There are currently no product reviews
Write a review on this product!

Additional Information
This product was added to our catalog on Thursday 06 March, 2008.
Notify me of updates to Adtran TSU 120e T1/Fractional T1 DSU
Tell someone you know about this product.