Adtran TSU LT T1/Fractional T1 CSU/DSU T1/Fractional T1 CSU/DSU - 1 x RJ-48C Network, 1 x Serial V.35 Serial, 2 x RJ-48C , 3 x Bantam - CCITT V.35 - 1.54Mbps

$654.99

Product Info

General Information
Manufacturer	Adtran
Manufacturer Part Number	1203060L1
Manufacturer Website Address	www.adtran.com
Product Name	TSU LT T1/Fractional T1 CSU/DSU
Marketing Information	The ADTRAN TSU LT is a low cost, full-featured T1/FT1 Data Service/ Channel Service Unit (DSU/CSU). The TSU LT provides an interface between T1 or Fractional T1 service and the end user's Data Terminal Equipment (DTE) for applications such as LAN to LAN bridging, Frame Relay circuit termination and videoconferencing. The TSU LT provides access to traditional dedicated point-to-point T1 services as well as network termination for Frame Relay.
Product Type	T1/Fractional T1 CSU/DSU

Technical Information
Operating Mode	Point-to-Point
Data Encoding	AMI/B8ZS
Diagnostic Features	Tests: Local: - Payload/Line Loopback - DTE Loopback Remote: - Payload/Line Loopback - V.54 (DTE) Loopback Network: CSU and DSU loopbacks Test Access jacks for Network T1

Interfaces/Ports
Ports	1 x 8-pin RJ-48C Network Physical 1 x 34-pin Serial V.35 Mechanical 2 x RJ-48C Serial 3 x Bantam Management
Electrical Interface	CCITT V.35

Media & Performance
Data Transfer Rate	56Kbps to 1.54Mbps DTE 1.54Mbps Network

Environmental Conditions
Temperature	0 °C (32 °F) to 50 °C (122 °F) Operating -20 °C (-4 °F) to 70 °C (158 °F) Storage
Humidity	Up to 95% Non-condensing Relative Humidity

Physical Characteristics
Form Factor	Rack-mountable Wall-mountable
Dimensions	1.5" Height x 9" Width x 6.25" Depth
Shipping Dimensions	6.5" Height x 8.5" Width x 11.25" Depth
Weight	2 lb
Shipping Weight	3.08 lb

Miscellaneous
Additional Information	Single V.35 DTE interface for applications such as LAN-to-LAN bridging, Frame Relay circuit termination, and dedicated videoconferencing User-programmable with front panel LCD and keypad Supports VT100 terminal configuration and remote configuration using control port Easy to use front panel keypad or EIA-232 control port for unit configuration and monitoring Remote TSU LT configuration via FDL or 8k in-band Local and remote loopback capability Extensive built in test capabilities Network T1 Test Access jacks Support for T-Watch PRO software for optional PC based configuration IEC standard power connection DTE Transmit Clock: Automatic Reports: NI information stored for last 24 hours in 15 minute increments PRMS: ANSI Performance Report Messages (User selectable) Framing: - SF/ESF - Auto Detection ESF Format: - AT&T 54016 - ANSI T1.403 DSO Assignment: - Contiguous - Alternating T1 Transmit Timing: - Network Loop Timed - Internal - DTE Performance Monitor Performance Data: - BPVs/CRCs - ES - SES - UAS - % AS - % EFSEC - Alarms - Errors Built-In Test Patterns: - 511 (active DS0s) with error insert available - 1:8 (all DS0s) - All 1's (all DS0s) - All 0's (all DS0s)
Certifications & Standards	FCC part 15 Class A FCC Part 68 Industry Canada CS03 UL CUL

Warranty
Standard Warranty	5 Year Limited - North America


There are currently no product reviews. Write a review on this product!

Maunufacturer's Information
Other products

Product Reviews
There are currently no product reviews
Write a review on this product!

Additional Information
This product was added to our catalog on Thursday 06 March, 2008.
Notify me of updates to Adtran TSU LT T1/Fractional T1 CSU/DSU
Tell someone you know about this product.