Transition Networks 10/100 Bridging Stand-Alone Media Converter Media Converter - 1 x RJ-45 , 1 x SC Duplex - 10/100Base-TX, 100Base-FX

$344.99

Product Info

General Information
Manufacturer	Transition Networks, Inc
Manufacturer Part Number	SBFTF1013-100
Manufacturer Website Address	www.transition.com
Product Name	10/100 Bridging Stand-Alone Media Converter
Product Type	Media Converter

Media & Performance
Connectivity	Twisted Pair Fiber
Connectivity Media	10/100Base-TX Twisted Pair 100Base-FX 1310 nm Multi-mode Fiber
Distance Support	1.24Mile

Network & Communication
Network Technology	10/100Base-TX 100Base-FX

Management & Protocols
Protocols	Ethernet Fast Ethernet

Controls/Indicators
Status Indicators	Unit LED: The TP LEDs use a bi-color LED that can be turned on green or yellow. Green - ON power applied to board. Port LEDs: Copper: Duplex/Link/Activity Yellow-ON: Link; BLINK: Activity Copper: 10Mbps/ 100Mbps Yellow - 10Mbps Green - 100Mbps Fiber: Link/Activity Green - ON; Link; BLINK: Activity Fiber: Duplex Green - ON; Full; OFF: half

Miscellaneous
Additional Information	RAM Buffers: 128KB Filtering Addresses: 2K MAC addresses per unit Filtering Rate: - 14,880pps for Ethernet - 148,800pps for Fast Ethernet Forwarding Rate: 14,880pps for Ethernet 148,800pps for Fast Ethernet AutoCross on all TP ports: AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. N-Way Auto-Negotiation on all TP ports: Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter; unlike competitive products that ship in auto-negotiation mode and may require both hardware and software configuration. Link Pass Through (on single TP port units) 10Mbps or 100Mbps on all TP ports Half or full duplex on all ports including fiber Far End Fault (FEF) mode Individual switches for both TP ports (single board only, see model types below) LED indications for all modes of operation Optional second TX port with a port monitoring option
Certifications & Standards	IEEE 802.3® IEEE 802.3U UL Listed FCC & CISPR Class A EN60950 and CSA Certified CE Mark EN55022 Class B EN55024

Warranty
Standard Warranty	Lifetime Limited
Parts Warranty/Labor	- Lifetime
Additional Warranty Information	Effective for Products Shipped May 1, 1999 and After. Every Transition Networks' labeled product purchased after May 1, 1999 will be free from defects in material and workmanship for its lifetime. This warranty covers the original user only and is not transferable. This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of operation or handling, including over-voltage failures caused by use outside of the product's specified rating, or normal wear and tear of mechanical components. If the user is unsure about the proper means of installing or using the equipment, contact Transition Networks' free technical support services.


There are currently no product reviews. Write a review on this product!

Maunufacturer's Information
Other products

Product Reviews
There are currently no product reviews
Write a review on this product!

Additional Information
This product was added to our catalog on Thursday 06 March, 2008.
Notify me of updates to Transition Networks 10/100 Bridging Stand-Alone Media Converter
Tell someone you know about this product.