Transition Networks 10BASE-T to 10BASE-FL Media Converter Media Converter - 1 x RJ-45 , 1 x ST Duplex - 10Base-T, 10Base-FL

$166.99

Product Info

General Information
Manufacturer	Transition Networks, Inc
Manufacturer Part Number	E-TBT-FRL-05
Manufacturer Website Address	www.transition.com
Product Name	10BASE-T to 10BASE-FL Media Converter
Marketing Information	Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before.
Product Type	Media Converter

Media & Performance
Connectivity	UTP/STP Fiber
Connectivity Media	10Base-T Category 3 UTP/STP 10Base-FL 850 nm Multi-mode Fiber
Distance Support	1.24Mile

Network & Communication
Network Technology	10Base-T 10Base-FL

Management & Protocols
Protocols	Ethernet

Controls/Indicators
Status Indicators	Unit LED: Power: Lit for normal operation Port LEDs: Link: Lit LED indicates unit is receiving link pulses from a compliant device Receive: Flashing or lit LED indicates packets are being received

Power Description
Input Voltage	9 V DC

Environmental Conditions
Temperature	32 °F (0 °C) to 122 °F (50 °C) Operating -13 °F (-25 °C) to 185 °F (85 °C) Storage
Humidity	5 to 95% Operating
Altitude	0 ft to 10000 ft Operating

Miscellaneous
Additional Information	LANart Inside: Select Transition Networks' product now use LANart's state-of-the-art ASIC technology. These chips go beyond the functions provided by off-the-shelf-silicon used by our competitors, to incorporate enhancements specific to media conversion technology such as link fault propagation and indicators for power, data and link status. AutoCross Technology: AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. LinkAlert: Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. Switches: S1: Enables/disables LinkAlert Fiber Optic Connector: Min TX PWR: -16.0 dBm Max TX PWR: -10.0 dBm RX Sensitivity: -32.5 dBm Max In PWR: -8.0 dBm Link Budget: 16.5 dB
Certifications & Standards	IEEE 802.3® 10BASE-T; 10BASE-FL UL Listed C-UL Listed (Canada) CISPR/EN55022 Class A FCC Class A CE Mark

Warranty
Standard Warranty	Lifetime Limited
Parts Warranty/Labor	- Lifetime
Additional Warranty Information	Effective for Products Shipped May 1, 1999 and After. Every Transition Networks' labeled product purchased after May 1, 1999 will be free from defects in material and workmanship for its lifetime. This warranty covers the original user only and is not transferable. This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of operation or handling, including over-voltage failures caused by use outside of the product's specified rating, or normal wear and tear of mechanical components. If the user is unsure about the proper means of installing or using the equipment, contact Transition Networks' free technical support services.


There are currently no product reviews. Write a review on this product!

Maunufacturer's Information
Other products

Product Reviews
There are currently no product reviews
Write a review on this product!

Additional Information
This product was added to our catalog on Thursday 06 March, 2008.
Notify me of updates to Transition Networks 10BASE-T to 10BASE-FL Media Converter
Tell someone you know about this product.