Transition Networks T1/E1 Remotely Managed Stand Alone Media Converter Media Converter - 1 x SC , 1 x RJ-45 - T1/E1

$838.99

Product Info

Transition Networks T1/E1 Remotely Managed Stand Alone Media Converter

Item #:	EH10059982
Manufacturer:	Transition Networks, Inc
Mfr. Part #:	SSDTF1014-105
Condition:	New
Price:	$838.99
Stock:	Out of Stock

General Information
Manufacturer	Transition Networks, Inc
Manufacturer Part Number	SSDTF1014-105
Manufacturer Website Address	www.transition.com
Product Name	T1/E1 Remotely Managed Stand Alone Media Converter
Marketing Information	Remote management in a stand-alone device. When used in conjunction with a managed Point System chassis, this stand-alone unit can be managed remotely.
Product Type	Media Converter

Interfaces/Ports
Number of Ports	2
Interfaces/Ports	1 x SC 1 x RJ-45

Media & Performance
Connectivity	Twisted Pair Fiber
Connectivity Media	10/100Base-TX Twisted Pair 100Base-FX 1300 nm Multi-mode Fiber
Distance Support	20km

Network & Communication
Network Technology	T1/E1

Management & Protocols
Management	Remote unit in-band management

Controls/Indicators

Status Indicators

Unit LED:

PWR:

Lit for normal operation

Port LEDs:

SDC:

Steady LED indicates copper link is up; Flashing LED (once/second) indicates transmitting on link if other link is down; Flashing LED (5 times/second) indicates All Ones detected on Link.

SDF:

Steady LED indicates fiber link is up; Flashing LED (once/second) indicates transmitting on link if other link is down; Flashing LED (5 times/second) indicates All Ones detected on Link.

Power Description
Power Consumption	9 W Maximum

Environmental Conditions
Temperature	32 °F (0 °C) to 122 °F (50 °C) Operating
Humidity	5 to 95% Non-condensing Operating
Altitude	0 ft to 10000 ft

Physical Characteristics
Form Factor	External
Dimensions	3.25" Height x 3.25" Width x 4.8" Depth
Shipping Dimensions	3" Height x 9.2" Width x 12" Depth
Shipping Weight	2 lb

Miscellaneous

Additional Information

Local or Remote Loop-backs on copper or fiber in software mode

Loopback switch facilitates local installation

Built-in troubleshooting with the addition of a selectable TAOS (Transmit All Ones) switch on the fiber and copper interfaces allows the network engineer to test all T1/E1 equipment on that network segment and ensure the network link.

Dry relay contacts enable the media converter to be tied into a separate alarm circuit commonly found in a T1/E1 twisted pair environment. Contacts will be activated on loss of power or loss of fiber link.

An LED provides Alarm Indication Signal (AIS).

Certifications & Standards

UL Listed

C-UL Listed (Canada)

CISPR/EN55022 Class A

FCC Class A

CE Mark

ITU-T

ANSI

AT&T

ETSI

Warranty
Standard Warranty	Lifetime Limited

Reviews


There are currently no product reviews. Write a review on this product!

Manufacturer

Maunufacturer's Information
Other products

Extra Info

Product Reviews
There are currently no product reviews
Write a review on this product!

Additional Information
This product was added to our catalog on Thursday 06 March, 2008.
Notify me of updates to Transition Networks T1/E1 Remotely Managed Stand Alone Media Converter
Tell someone you know about this product.