Transition Networks T1/E1 Remotely Managed Stand Alone Media Converter Media Converter - 1 x RJ-45 , 1 x ST Duplex - T1/E1 - Rack-mountable

$688.99

Product Info

Transition Networks T1/E1 Remotely Managed Stand Alone Media Converter

Item #:	EH10634316
Manufacturer:	Transition Networks, Inc
Mfr. Part #:	SSDTF1027-105
Condition:	New
Price:	$688.99
Stock:	Out of Stock

General Information
Manufacturer	Transition Networks, Inc
Manufacturer Part Number	SSDTF1027-105
Manufacturer Website Address	www.transition.com
Product Name	T1/E1 Remotely Managed Stand Alone Media Converter
Marketing Information	Transition Networks SSDTF1027-105 media converter encode and decode T1 or E1 twisted-pair copper signals over fiber optic cable to extend the distance and transmission reliability of high-speed T1 or E1 data traffic. Remote management in a stand-alone device. When used in conjunction with a managed Point System chassis, this stand-alone unit can be managed remotely. The SSDTF1027-105 is designed to be installed in pairs.
Product Type	Media Converter

Interfaces/Ports
Number of Ports	2
Interfaces/Ports	1 x RJ-45 1 x ST Duplex

Media & Performance
Connectivity	UTP Fiber
Connectivity Media	T1/E1 UTP T1/E1 1300 nm Multi-mode Fiber
Distance Support	20km

Network & Communication
Network Technology	T1/E1

Management & Protocols
Management	Remote unit in-band management

Controls/Indicators

Status Indicators

Unit LED:

PWR

Port LED:

SDC: Steady LED indicates copper link is up

SDF: Steady LED indicates fiber link is up

Power Description
Input Voltage	12 V DC
Input Current	0.5 A
Power Consumption	3.7 W

Environmental Conditions
Temperature	0 °C (32 °F) to 50 °C (122 °F) Operating -25 °C (-13 °F) to Storage
Humidity	5 to 95% Non-condensing
Altitude	0 ft to 10000 ft

Physical Characteristics
Form Factor	Wall-mountable Rack-mountable
Dimensions	1" Height x 1" Width x 4.8" Depth
Weight	10oz
Shipping Weight	2 lb

Miscellaneous

Additional Information

Power: External AC/DC required; 12V DC, 0.5A, unregulated, standard

Converts the copper ports on T1/E1 devices, such as a PBX or T1/E1 Router,to single mode fiber.

Extends distances 2,000 meters over 80,000 meters over single mode fiber

Jitter attenuators optimize Bit Error Rate (BER) performance

An LED provides Alarm Indication Signal (AIS)

Built-in troubleshooting with the addition of a selectable TAOS (Transmit All Ones) switch on the fiber and copper interfaces allows the network engineer to test all T1/E1 equipment on that network segment and ensure the network link.

Dry relay contacts enable the media converter to be tied into a separate alarm circuit commonly found in a T1/E1 twisted pair environment. Contacts will be activated on loss of power or loss of fiber link.

Certifications & Standards

Compliance:

UL Listed

C-UL Listed (Canada)

CISPR/EN55022 Class A

FCC Class A

CE Mark

Standards:

ITU-T

ANSI

AT&T

ETSI

Warranty
Standard Warranty	Lifetime

Reviews


There are currently no product reviews. Write a review on this product!

Manufacturer

Maunufacturer's Information
Other products

Extra Info

Product Reviews
There are currently no product reviews
Write a review on this product!

Additional Information
This product was added to our catalog on Wednesday 31 December, 1969.
Notify me of updates to Transition Networks T1/E1 Remotely Managed Stand Alone Media Converter
Tell someone you know about this product.