Siig - Cyber 2S1P PCI 2 x 9-pin DB-9 Male RS-232 Serial, 1 x 25-pin DB-25 Female IEEE 1284 Parallel - PCI-X, PCI

$76.99

Product Info

Item #:	EH1010124600
Manufacturer:	Siig, Inc
Mfr. Part #:	JJ-P21022-S6
Condition:	New
Price:	$76.99
Stock:	Out of Stock

General Information
Manufacturer	Siig, Inc
Manufacturer Part Number	JJ-P21022-S6
Manufacturer Website Address	www.siig.com
Product Name	Cyber 2S1P PCI
Marketing Information	Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots Will work as standard RS232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB Parallel Port supports EPP/ECP, BPP (bi-directional), SPP (standard) parallel port modes RoHS compliant
Packaged Quantity	1
Packing	Box
Package Type	Retail
Product Type	Serial/Parallel Combo Adapter

Technical Information
Host Interface	Universal PCI
Baud Rate	115KbpsUp to
UART Type	16550
IRQ	IRQ sharing reduces IRQ conflicts
Controller Type	SIIG CyberPro
Parallel Port Modes	EPP/ECP BPP SPP
Platform Support	PC

Interfaces/Ports
Ports	2 x 9-pin DB-9 Male RS-232 Serial 1 x 25-pin DB-25 Female IEEE 1284 Parallel

Power Description
Input Voltage	3.3 V DC 5 V DC

Physical Characteristics
Form Factor	Full height Plug-in Card
Shipping Dimensions	6.5" Height x 9.5" Width x 1.5" Depth
Shipping Weight	1 lb 1 lb

Miscellaneous
Package Contents	(1) Cyber 2S1P PCI card (1) DB9 (9-pin) serial port cable (for 2nd serial port) (1) Driver CD (1) Quick Installation Guide
Additional Information	Regulatory approval(s): FCC Class B (DoC) & CE RoHS compliant OS support: Windows 95/98/98SE/ME/NT4.0/2000/XP/Server 2003/Vista (32-bit) Chip: CyberPro Bus type: 32-bit PCI Port type: Two 9-pin RS232 serial port & one 25-pin parallel port IRQ sharing reduces IRQ conflicts Built-in 32-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment 4-layer PCB board: separate layers for data & grounding. Greatly reduces signal noise & loss. Delivers more reliable high-speed data transfers Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection Supports 3.3V operation with 5V tolerance Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible Supports PME (Power Management Event). Allows device to request a change in system power state (wake up system) Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers much improved noise suppression & achieves higher levels of performance/reliability Use SMT (Surface Mount Technology) type crystal. Offers cleaner design than traditional DIP-type crystal. Provides greatly improved grounding, which reduces EMI emission & improves performance/reliability
System Requirements	Pentium or equivalent computer with an available 32-/64-bit PCI or PCI-X slot Windows 95 or later
Compatibility	Plug and Play Supported Operating System: Windows 95 Windows 98 Windows 98SE Windows ME Windows NT4.0 Windows 2000 Windows XP Windows Server 2003 Vista (32-bit)
Certifications & Standards	FCC Class B (DoC), CE, RoHS

Warranty
Standard Warranty	Lifetime Repair/Replace

Reviews


There are currently no product reviews. Write a review on this product!

Manufacturer

Maunufacturer's Information
Other products

Extra Info

Product Reviews
There are currently no product reviews
Write a review on this product!

Additional Information
This product was added to our catalog on Thursday 06 March, 2008.
Notify me of updates to Siig - Cyber 2S1P PCI
Tell someone you know about this product.